3 in 1 Handheld Oscilloscope, Multimeter, DDS Signal Generator, 2 Channels, 10MHz Bandwidth, 50MSa/s Sampling Rate, 9999 Count, Volt Meter, Current Capacitance Resistance Diode Test (2C23T)

Oscilloscope ParametersChannel: dualAnalog bandwidth: 10MHzSample rate: 50MSa/sStorage depth: 32kbImpedance: 1MΩTime Base Range: 50ns-10sVertical sensitivity: 20mV/div-10V/div (X1)Maximum voltage measured: ±400VTrigger mode: AUTO/Normal/SingleTrigger type: Rising edge, Falling edgeDisplay mode: YT/ScrollCoupling method: AC/DCSave waveform screenshot: YesExport waveform images: YesMultimeter ParametersDC voltage: 9.999V/99.99V/999.9V, ±(0.5%+3)AC voltage: 9.999V/99.99V/750.0V, ±(1%+3)DC current: 9999μA/99.99mA/999.9mA/9.999A, ±(1.2%+3)AC current: 9999μA/99.99mA/999.9mA/9.999A, ±(1.5%+3)Resistance: 9.999MΩ/999.9KΩ/99.99KΩ/9.999KΩ/999.99Ω, ±(0.5%+3) / 99.99MΩ, ±(1.5%+3)Capacitance: 999.9μF/99.99μF/9.999μF/999.9nF/99.99nF/9.999nF, ±(2.0%+5) / 9.99mF/99.99mF, ±(5.0%+20)Temperature: (-55~1300°C)/(-67~2372°F), ±(2.5%+5)Diode: YesContinuity test: YesLive line detection: YesSignal Generator ParametersChannel: single channelFrequency: 1Hz-2MHzAmplitude: 0.1-3.3VOutput waveform: sine, square, triangular, full wave, half wave, noise wave, DC OutputDuty cycle: 0-100%SpecificationModel: 2C23TScreen: 2.8” 320x240 color displayPower supply: built-in 3000mAh li-ion battery, 5V/1A Type-C portDevice size: 6.57*3.5*1.38 inDevice weight: 0.66 lb.PACKAGE-1 x Multifunctional Oscilloscope-1 x 10X Probe-1 x Crocodile Clips Probe-1 x Multimeter Probe-1 x Charging Cable-1 x Instructions

• 3 in 1 handheld device combines oscilloscope, multimeter, and DDS generator capabilities, refer to parameters of each function in the description below
• Oscilloscope has dual channel 2 x 10MHz bandwidth, real-time sampling rate of 50MSa/s, storage depth of 32kb, and vertical sensitivity of 20mv/div-10v/div (x1), and can measure voltage of max. ±400V, 3 trigger mode - auto/normal/single
• Multimeter enables testing of voltage up to 750V AC or 999.9V DC, current (DC/AC), resistance, capacitance, diodes, and continuity with high accuracy, and allows testing of diode and continuity, ensuring quick and efficient component analysis during troubleshooting tasks
• Signal generator has single channel, frequency of 1Hz-2MHz and amplitude of 0.1-3.3V, and offers 7 output waveforms - sine, square, triangular, full wave, half wave, noise wave, DC Output
• Multimeter features a 2.8" LCD display, automatic measurement functions, waveform image storage and export capabilities, built-in high-voltage protection, and a rechargeable battery for portability and convenience