5ft Beer Dual Lines Kit & CO2 Gas Manifold & CGA-320 Co2 Regulator

5ft Beer Lines Kit & CO2 Gas Manifold & Co2 Regulator

• Efficience & Low Cost:The homebrew CO2 gas manifold has four O.D 5/16"barb fitting output, fit for I.D 5/16" gas lines,whichwu prevents leaks and allows you to dispense beer from two kegs simultaneously using one CO2 gas cylinder. Connect multiple regulators at low cost
• Independent Shut Off & Built-in Check Valve: Each gas tubing line can be turned off individually without affecting the flow transferred to other kegs. Each shut-off valve contains a built-in check valve to ensure that CO2 carbonation beer will not flow back into the gas line if the brewing keg pressure value is high.
• Lock Ring & Constant Pressure Design: The dual-stage co2 regulator maintains a stable output pressure by reducing it in two steps.The adjustment knob has a locking nut; simply turn the locking ring counterclockwise to loosen it, adjust the pressure, and then lock the PSI value. This design effectively prevents accidental pressure setting changes from impacts. And, the locking ring only needs to be moved when pressure readjustment is required.
• Rotating Threaded End Fitting:The regulator can be fitted with either a 1/4-inch or 5/16-inch barb fitting as needed, for connecting hoses with 1/4“ I.D and 5/16” I.D.(Note: Always check beforehand whether a white gasket is installed at the single-gauge connection point. Ensure one white gas washer is inserted before connecting the regulator to the cylinder to prevent gas leakage.)
• Package Includes:Comes with 5ft kegerator beer line ID 3/16" OD 7/16", 5ft Co2 Gas Line ID 5/16" OD 9/16" and 8pcs beer hose clamps