DiySecurityCameraWorld- 5 Inch CCTV Tester Monitor IV8W 8MP AHD 8MP TVI 8MP CVI CVBS Analog Security Camera Tester Video Monitor with PTZ Controller/UTP Cable Test/VGA HDMI Input

5 Inch CCTV Tester Monitor 8MP AHD 8MP TVI 8MP CVI CVBS Analog Security Camera Tester Video Monitor with PTZ Controller/UTP Cable Test/VGA HDMI Input ;Product Functions:Video signal testing PTZ controller Image generator: Multi-format video OUT port image generator, sending a variety of standard (e.g. PAL, NTSC) color graphics section DC12V 1A output power Audio testing: Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable. Enhanced network cable testing: By UTP CABLE TEST port on the meter, you can test the connection of network cable. VGA/HDMI input: support VGA/HDMI 1.0 video input, once connect VGA/HDMI video, please switch selector to select HDMI or VGA mode. The maximum resolution is 1920 x 1440 TVI camera test: HD TVI video surveillance testing, support 1MP 2MP 3MP 4MP 5MP 8MP. When TVI signal input, the tester will display HD TVI camera image. AHD camera test: HD video surveillance testing, support AHD 2.0 version,1MP 2MP 3MP 4MP 5MP 8MP. When AHD signal input, the tester will display the AHD camera image. CVI camera test: HD CVI video surveillance testing, support 1MP 2MP 3MP 4MP 8MP. When CVI signal input, the tester will display HD CVI camera image. LED lamp: It is useful for the engineer to install and maintain security system at night. LED On/Off pressing button, easy to operate. The battery graphic display: The tester has advanced power control and protection circuit, low-power energy-saving, 4 to 5 hours on a single charge, can be used normally for 12 hours. Packing listHD coaxial tester Adapter DC5V 1.5A（with USB cable) International Standard 2600ma battery BNC cable RS485 connector Power output conversion cable Audio cable Lanyard Tool bag Instruction Manual

• Developed for the on-site installation and maintenance of Analog Camera (CVBS) and HD Coaxial Camera, having TVI,CVI, AHD. (NOT Support IP Camera).
• High-resolution 5.0 inches 800 (RGB) x480 wide viewing angle display, Viewing angle larger, more intuitive and easy to display the camera image quality. Support PAL/NTSC standard video signal
• Video monitor tester built-in Pelco-D / P PTZ control protocol,etc. , through its own RS485 interface, the user can control the PTZ up, down, left, right rotation, and adjust one machine zoom, focus,aperture size. Multi-format video OUT port image generator, sending a variety of standard (e.g. PAL, NTSC) color graphics section
• Power the camera with DC12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available.
• Rechargeable: Built-in 2600mA battery X 2,after charging 3-4 hour, working time lasts 11 hours