Elm Burl Carpathian Wood Veneer 9" x 14" raw no Backing 1/42" Thickness AAA

Carpathian Elm Burl wood veneer 9" x 14" raw with no backing 1/42" thickness as pictured. ONE piece as pictured. * Will clear 7" x 11" square if hole is cut out and angled side not used. Ships flat in between thick cardboard. Burl wood veneer usually will require some flattening prior to use. Veneer softener as shown can be used (sold separately) as well as other options. Other sizes and backed veneer are available. Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995. About pictures : Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular. Thickness : (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40” Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” How to cut : generally cut with a razor/box knife or similar tools and some type of straight edge is typically used. How to apply : Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying. How to finish : most any conventional finishing products can be used with veneer that is applied correctly. Disclaimer: Sometimes veneers have minor splits or t

• Model: Wood veneer Elm Burl Carpathian 1/42" thickness, Veneer Type: Raw
• Brand: Carpathian Elm Burl wood veneer raw flitch thin
• Item Type: Veneer Sheet
• Veneer Cut: Rotary Cut