Kettle Retrofit Part Weldless Bulkhead 2inch Tri Clamp 304 Stainless Steel Double TC 48mm Hole Required(Double Side TC)

Kettle Retrofit Part Weldless Bulkhead 2inch Tri ClampWeldless Bulkhead 2"TC - Single Side TCThis bulkhead is weldless design, allows you to add a TC port to any vessel no need welding or soldering. Just drill a 48mm hole and tighten the locknut. We recommend our 48mm hole sawfor drilling the hole.Weldless 2" TC Triclamp Bulkhead - Double SidedThis bukhead is weldless desing, allows you to add a TC port to any vessel - no need welding or soldering. Just drill a 48mm hole. Instead of an internal locknut, this hex fitting with its own 2"TC flange on it. When tightened together through a hole in the pot/tank, you will leave with 2"TC flanges inside an out so you can add your spray ball, sparge arm or whatever else you want.We recommend our 48mm hole saw for installing this to your kettle.C 48mm Hole Punch SetIt produce clean holes and can be used in mild sheet steel up to 3mm thick or stainless steel up to about 1.5mm thick.It produces a perfectly round and clean hole, free of any burrs or rough edges.We don't recommended using regular bits, step bits, or hole saws to make precision holes.You need a 16mm conduit punch which makes a 48mm diameter hole.D Weldless Bulkhead 2"TC + 48mm Hole Punch SetE Weldless Bulkhead 2"TC Double Side + 48mm Hole Punch Set==========Hign-concerned Chemical : NoneFeature : Eco-FriendlyQuantity : 1 pcsBar Accessories Type : Kettle BulkehadCertification : CIQMaterial : Stainless SteelType : Bar AccessoriesCN : ShanghaiOrigin : Mainland China

• This partition features a weldless design, allowing for the addition of TC ports to any container without the need for welding or brazing. Just drill a 48mm hole and tighten the locking nut. We recommend using our 48mm drill to drill holes.,It can make clean holes and can be used for low-carbon steel plates with a thickness of up to 3 millimeters or stainless steel plates with a thickness of about 1.5 millimeters. It can drill a perfect and clean round hole without any burrs or rough edges.