PFERD 45473 Mounted Flap Wheel, Zirconia Alumina Z-Cool, 2" Diameter x 1" Length, 1/4" Shank, 60 Grit, 23000 Max RPM (Pack of 10)

PFERD mounted flap wheel with Z-COOL abrasive are purposedesigned for use on stainless steel and hightemperature alloys. These provide high stock removal rates and particularly cool grinding action (abrasive will not load up). The coated abrasive flaps are arranged radially around the axis of the flap wheel in a fan-type configuration. Due to their flexibility, they adapt ideally to the contours of the workpiece. The abrasive grit is embedded in a resinoid bond on the strong, flexible backing cloth. PFERD mounted flap wheels are designated "flap wheels with shaft" according to ISO 3919. Advantages: High flexibility; High stock removal due to the aggressive coated abrasive; Carrier material wears off uniformly and without residue on the workpiece surface, meaning that sharp abrasive grit is exposed at all times; Due to the flat cast core construction, the face of the mounted flap wheels can be used to work very close to edges and in corners. Application examples: Fine grinding on radii in tool and mould construction; Machining of small and hard-to-reach areas in apparatus engineering and tank construction; Machining of fittings made out of non-ferrous and light metals; Grinding of turbine blades in aircraft engine construction and repair. PFERDERGONOMICS recommends mounted flap wheels to sustainably reduce vibration and noise levels during use and to improve working comfort. Specification: Diameter (inches): 2; length (inches): 1; Shank diameter (inches): 1/4; Recom. Speed RPM: 7,000; Maximum Rotational Speed (RPM): 23,000; Abrasive: Zirconia Alumina Z-COOL; Grit size: 60.

• High stock removal due to the aggressive coated abrasive
• High flexibility
• Suitable for stainless steel (INOX), bronze, titanium and nickel- and cobalt-based alloys materials
• Available in grit 60
• Built with zirconia alumina z-cool abrasive material