SPAX -M, MDF Screws, 3.5 x 45 mm, Pack of 200, T-Star Plus, countersunk Head, Small milling Head, Partial Thread, Cut tip, WIROX A3J, Blank galvanised, 0441010350453

SPAX - Safety, quality and reliability since 1967. The branded product in the characteristic green packaging – produced at home in Germany and exported from there to all over the world: clever minds in Ennepetal constantly develop new ideas, expand the product range and establish the highest quality for DIY enthusiasts, professional processors, planners and architects all over the world. - This product is suitable for use: for screwing MDF materials and other thin-walled panels made of wood materials indoors. Spax-exclusive Wirox surface - countersunk head with milling ribs pulls particularly easily into the material and can be recessed flush. Optimum power transmission and clean fit with SPAX bit T-Star plus T20 with guide pins. Effortless work and longer battery life: no pre-drilling (depending on wood). Precise attachment and reduction of the splicing effect thanks to the drilling function of the CUT tip. Easier cutting of the wood fibre thanks to Spax-typical wave profile. Made in Germany: TÜV certified. Approved for building inspection: European Technical approval for screws as wood fasteners in load-bearing wooden constructions (ETA-12/0114) - Box contents: 1 Spax-M box, 200 pieces MDF screw, T-Star plus countersunk head, 75° milling head, partial thread, cut tip, Wirox surface, thread diameter (Ød1) = 3.5 mm x total length (Ls) = 45mm, part Thread length (LgT) = 30 mm, head diameter (Ødk): 6 mm, bit not included

• Use: for screwing MDF materials and other thin-walled panels made of wood materials indoors. Spax exclusive Wirox surface
• Countersunk head with milling ribs pulls particularly easily into the material and can be recessed flush. Optimum power transmission and clean fit with SPAX bit T-Star plus T20 with guide pins
• Effortless work and longer battery life: no pre-drilling (depending on the wood). Precise attachment and reduction of the splicing effect thanks to the drilling function of the CUT tip. Easier cutting of the wood fibre thanks to Spax-typical wave profile
• Made in Germany: TÜV certified. Approved by building authorities: European technical approval for screws as wood fasteners in load-bearing wooden constructions (ETA-12/0114)
• Box contents: 1 Spax-M box, 200 pieces MDF screw, T-Star plus countersunk head, 75° milling head, partial thread, cut tip, WIROX surface, thread diameter (Ød1) = 3.5 mm x total length (Ls) = 45 mm, partial thread length (LgT) = 30 mm, head diameter (Ødk): 6 mm, bit not included